搜索资源列表
STM32-C51-usart
- 实现C51单片机与stm32的串口通信,LCD1602显示接收和传输的数据 有电路接线图 -C51 and stm32 serial port communication, LCD1602 display the data transmission and receiving Circuit wiring diagram
touchscreen-based-on-STM32
- 采用STM32芯片实现串口组态屏的编程的例程，方便学习和界面设计。-Using STM32 chip serial port configuration screen programming routines, easy to learn and interface design.
stm32-handwrite-_recognize
- 基于stm32的手写识别程序：开机的时候先初始化手写识别器，然后检测字库，之后进入等待输入状态。此时，我们在手写区写数字/字符，在每次写入结束后，自动进入识别状态，进行识别，然后将识别结果输出在LCD模块上面（同时打印到串口）。通过按KEY0可以进行模式切换（4种模式都可以测试），通过按KEY2，可以进入触摸屏校准（如果发现触摸屏不准，请执行此操作）。DS0用于指示程序运行状态。-Based stm32 handwriting recognition program: boot time to
Stm32-USART3
- 串口3部分复用PC端口，简单例程，初次使用者可以学习学习-Part 3 PC serial port multiplexing, a simple routine, first-time users can learn
uart2
- 串口处理...STM32处理函数，初始化等-Serial port... STM32 processing function, initialization and so on...
stm32-adc-dma
- 在 STM32 中，使用 ADC 时往往采用 DMA 传输方式，由 DMA 把 ADC 外设转换的数据传输到 SRAM，再进行处理，甚至直接把 ADC 的数 据转移到串口发送给上位机.-In STM32, often employ the use of ADC DMA transfer mode, the DMA the ADC peripheral conversion of data to the SRAM, and then processed, or even directly to
STM32-UASRT
- STM32单片机串口通信，可以与电脑、单片机实现信息交互-STM32 microcontroller serial port communication, can be realized with computer, single chip microcomputer information interaction
STM32-DAC
- 使用软件: keil5 硬件资源: 1,DS0(连接在PA8) 2,串口1(波特率:9600,PA9/PA10连接在板载USB转串口芯片CH340上面) 3,ALIENTEK 2.8/3.5/4.3/7寸TFTLCD模块(通过GPIO驱动,连接关系见lcd.h) 4,按键KEY0(PC5)/KEY_UP(PA0,也称之为WK_UP) 5,DAC(STM32内部DAC通道1,通过PA4输出) 6,ADC(STM32内部ADC1_CH1,连接
STM32-Serial-Port-and-DMA
- stm32单片机串口与DMA调试程序（通过串口调试助手发送数据给DMA,再通过DMA返回给串口）-stm32 microcontroller serial debugger and DMA (transmit data through the serial debugging assistant to the DMA, and then returned to the port by DMA)
stm32
- IO口使用，三个串口收发，双定时器的使用，串口中断、定时器中断等。-IO port to use, three serial port transceiver, dual timer, serial port interrupt, timer interruption.
stm32-Buffer
- stm32f103 通过串口接收数据存在 环形buffer 中， 串口采用DMA方式-Ring buffer, the serial port using DMA mode stm32f103 exist receive data through the serial port
STM32-Virtual-COM-Port
- STM32实现的虚拟串口，修正了64及整数倍字节发送的错误。-STM32 implement virtual serial port, an error correction and an integral multiple of 64 bytes sent.
STM32-usart
- STM32中串口的使用说明，简单明了，方便使用。-STM32 serial port instructions, simple and clear, easy to use.
ublox-stm32-uart
- 用51单片机读取ublox的数据，通信格式是uart串口，可用keil编译-51 single-chip reader to read ublox data, communication format is uart serial port, available keil compiler
stm32-serial-file
- 单片机串口必需文件 单片机串口必需文件 -muc serial port file
STM32-12864
- 基于STM32和带字库的LCD12864，时钟芯片FM31256，温湿度模块DHT11.通过串口校准时钟，LCD显示时间和温湿度.-Based on STM32 and with the font of the LCD12864, clock chip FM31256, temperature and humidity module DHT11. Through the serial port calibration clock, LCD display time and temperature
4_串口实验
- STM32 通过串口和上位机的对话，在收到上位机发过来的字符串后，原本返回给上位机。(STM32 through the serial port and the host computer dialogue, after receiving the host computer sent string, originally returned to the host computer.)
avg_price
- 在STM32中，针对LCD12864的单色屏(驱动型号ST7290，串口驱动方式)移植了UCGUI，可用于实际工程项目中。(In STM32, UCGUI has been ported to LCD12864's monochrome screen (drive mode, ST7290, serial port drive), which can be used in actual engineering projects.)
GPS
- 通过串口接收GPS模块的数据帧，从NMEA数据格解析出经纬度、UTC等信息，通过TFT屏幕显示出来。单片机采用STM32F103ZE,开发环境是RV MDK(The data frame of the GPS module is received through the serial port, and the latitude and longitude, UTC and other information are parsed from the NMEA data lattice, and
ET1100 V1.0
- 实现6路串口转工业以太网 主控为 stm32 与ET1100 通信(Realize the 6 way serial port to industrial Ethernet, the main control is STM32 and ET1100 communication)